Apr 2008
Uncomfortable Airlines
29/04/08 14:50 Filed in: rant
I
just don't understand why airline seats are so uncomfortable. I am writing this blog entry somewhere north of Nova Scotia at 33,000 feet, having been stuck in this seat for 4 hours, with another three to go before I land in New York. Once there, I have to clear customs and then wait for another 3 hours before sitting in another airline seat for 2 1/2 hours.
I think that whoever designs these seats needs shooting. Wouldn't you have thought that one of the design criteria for a seat is that it should be comfortable for those poor fools who have to sit in them for hours on end? I know that they have to be hard-wearing, but do they need to be hard-wearing on my bum too?
While I am ranting, how come I always end up sat behind the pillock who thinks that it is OK to put their seat into the reclined position before we've even left the runway?
So why am I putting myself through this tedium and discomfort? Well, I am currently on my way to Florida for a spot of wildlife photography. For the next couple of weeks I am going to be sitting in a swamp, surrounded by alligators, photographing whatever I can find. I will try and update the website whilst away. Watch this space......
just don't understand why airline seats are so uncomfortable. I am writing this blog entry somewhere north of Nova Scotia at 33,000 feet, having been stuck in this seat for 4 hours, with another three to go before I land in New York. Once there, I have to clear customs and then wait for another 3 hours before sitting in another airline seat for 2 1/2 hours.I think that whoever designs these seats needs shooting. Wouldn't you have thought that one of the design criteria for a seat is that it should be comfortable for those poor fools who have to sit in them for hours on end? I know that they have to be hard-wearing, but do they need to be hard-wearing on my bum too?
While I am ranting, how come I always end up sat behind the pillock who thinks that it is OK to put their seat into the reclined position before we've even left the runway?
So why am I putting myself through this tedium and discomfort? Well, I am currently on my way to Florida for a spot of wildlife photography. For the next couple of weeks I am going to be sitting in a swamp, surrounded by alligators, photographing whatever I can find. I will try and update the website whilst away. Watch this space......
Black Point Compensation
21/04/08 19:35 Filed in: digital photography
Having done a considerable amount of reading and research into this, it seems to me that there are basically two schools of thought about the use of Black Point Compensation (BPC). I guess that it shouldn't really come as a surprise, given that there are two possible settings!
BPC is controlled from within the printing dialogue within Adobe Photoshop and is provided to allow you to ensure the range of colours that your printer is asked to create falls within those offered by the printer/ink/paper combination you are using. This means that if, say, your printer profile reckons that the deepest black is 15% black, then setting BPC on makes sure that to tonal range is adjusted to fit in from 15% through to paper white.
If you turn off the BPC then there are three possible consequences
1) Nothing happens
2) The print becomes lighter. This will happen if the black point in the image is higher than the one offered by the printer. This results in a low-contrast, washed out, thin print
3) The print becomes darker. This happens if the black point in the image is lower than that offered by your printer combination. This means that the shadow areas of the image will block up and become solid black.
Clearly the last two results are far from ideal, so why run the risk of encountering them? Just leave BPC on!
BPC is controlled from within the printing dialogue within Adobe Photoshop and is provided to allow you to ensure the range of colours that your printer is asked to create falls within those offered by the printer/ink/paper combination you are using. This means that if, say, your printer profile reckons that the deepest black is 15% black, then setting BPC on makes sure that to tonal range is adjusted to fit in from 15% through to paper white.
If you turn off the BPC then there are three possible consequences
1) Nothing happens
2) The print becomes lighter. This will happen if the black point in the image is higher than the one offered by the printer. This results in a low-contrast, washed out, thin print
3) The print becomes darker. This happens if the black point in the image is lower than that offered by your printer combination. This means that the shadow areas of the image will block up and become solid black.
Clearly the last two results are far from ideal, so why run the risk of encountering them? Just leave BPC on!
Revised Website
21/04/08 19:26 Filed in: website
Over the weekend I revamped this website again - this time I think I am happy with it. For quite some time now I have been using RapidWeaver from RealMacSoftware to edit the site, but I have struggled to come up with a design I liked. A few days ago, that all changed when I discovered the Film Plus theme pack from Henk Vrieselaar. I simply love the feel that this theme gives, and when combined with BannerZest, I think the results look great. Henk also very kindly spotted a slight problem with one of my header graphics, which I'd missed. Thanks for that, you are a star!
